IPv6: Addressing, Neighbor Discovery and Packets
IPv6 changes address size and several network-layer mechanisms. Neighbor Discovery and ICMPv6 are central to link operation, while DHCPv6 can provide additional configuration.
Updated · Editorial approach and simulation limits
IPv6 addresses and packet headers
IPv6 uses 128-bit addresses written in hexadecimal groups, with a compressed notation for runs of zeroes. A packet includes source and destination addresses, a hop limit and a Next Header field that identifies an extension header or transport protocol.
The base IPv6 header is fixed in size; optional information is carried in extension headers. A packet inspector should follow the Next Header chain instead of assuming that TCP or UDP immediately follows the base header.
Neighbor Discovery and Router Advertisements
ICMPv6 Neighbor Discovery lets nodes discover routers and link-layer neighbors, verify address reachability and learn prefixes. Router Advertisements can communicate on-link prefixes and configuration hints. These messages serve link and network functions beyond the echo tests commonly associated with ICMP.
A host can form addresses through Stateless Address Autoconfiguration and may also use DHCPv6 for additional parameters or managed address assignment. The exact combination depends on router flags and network policy; DHCPv6 is not a replacement for all Router Advertisement functions.
Trace IPv6 failures across link, route and transport
When a connection fails, check whether the host formed a usable address, learned a default router, resolved a neighbor and received the expected DNS result. Then inspect the IPv6 route and any ICMPv6 errors, including Packet Too Big messages relevant to Path MTU Discovery.
IPv4 success does not prove IPv6 success: the address family may use different DNS answers, routes, firewall policy and portal provisioning. Compare both paths explicitly, including any Captive Portal option delivered in a Router Advertisement.
Explore IPv6 interactively
Follow the matching exchange packet by packet. The animation is a scripted teaching model with illustrative timing, not a capture of your network.
Specification and source
For exact protocol requirements, consult the primary document: RFC 8200: Internet Protocol, Version 6 (IPv6) Specification. This page summarizes selected behavior and is not a substitute for the specification.
Related protocol lessons
Browse all network protocols · Follow network configuration before the application request