Protocol ExplorerGuidesPricing

Network Protocols: IP, DNS, DHCP and Routing

Start with the packet path: IP carries datagrams, routers select next hops, and control and configuration protocols help hosts join and use a network.

Published · Updated

Curated learning paths from Protocol Explorer · Editorial approach and simulation limits

These lessons cover network addressing, routing and the services a device needs before an application can connect. They are grouped by the job each protocol performs, not by a promise that every trace contains every step.

Choose a first path through network protocols

Start with the problem visible at the host. If it has no usable address, inspect DHCP or IPv6 address configuration before reading application packets. If a name fails to resolve, follow DNS and distinguish the requested name from the resulting IP address. If the host sends traffic to an unexpected next hop, compare its local routing table with the packet’s destination prefix. These are separate steps in the same delivery path, and a success at one does not prove the next step worked.

For a first learning sequence, follow IP addressing and forwarding, then DNS and DHCP, then ICMP as a way to observe reachability and error reporting. Move to IPv6 when you need to understand neighbor discovery and address autoconfiguration. BGP belongs later: it explains how autonomous systems exchange reachability, not how a single laptop chooses its local default gateway.

When reading a capture, note where it was taken. An endpoint sees its own interface and local configuration; a router sees packets at a forwarding boundary; a recursive resolver sees DNS questions and answers. Pair each packet with the routing or resolver state that could have produced it, and keep the observation point explicit in your explanation.

Explore protocols in this topic

  • BGP

    How autonomous systems exchange reachable prefixes and apply routing policy.

  • DHCP

    How a host requests an address lease and network configuration.

  • DNS

    How recursive resolvers follow the hierarchy to answer name queries.

  • ICMP

    How IP hosts and routers report control and delivery conditions.

  • IP

    How addresses, forwarding fields and hop limits carry datagrams.

  • IPv6

    How IPv6 addressing, Router Advertisements and Neighbor Discovery work.

  • NTP

    How timestamp exchanges help systems estimate clock offset and delay.

Follow a packet from configuration to destination

A host may first learn addresses and resolvers, resolve a name, choose a route and then send a transport packet. Each stage has its own evidence: a DHCP lease does not prove DNS is reachable, and a DNS answer does not prove the destination accepts a connection.

Use the address family and observation point

IPv4 and IPv6 can use different DNS answers, routes, firewalls and control messages. A client-side capture may show only the host-to-router exchange while a router or resolver sees additional upstream activity. Record where the trace was taken before interpreting a missing packet.

Continue into transport or access control

Compare the network path with the transport protocol hub, or follow the captive portal login flow when a device has an address but restricted access.

Keep learning across layers