Wi-Fi: Association, Authentication and Network Access
Wi-Fi provides a wireless link between a station and an access point. Association, link security, IP configuration and Internet authorization happen at different layers.
Updated · Editorial approach and simulation limits
Discovery and association establish the wireless link
A station scans for access points, selects a network and performs the required authentication and association exchanges. Association means the station has joined the wireless network; it does not guarantee that it has received an IP address or can reach an Internet destination.
The access point and station negotiate capabilities and security settings. A trace captured over the air can expose management and control exchanges, while protected data frames require the appropriate keys for payload inspection.
Link security, DHCP and captive portal are separate
WPA security protects the wireless link according to the negotiated mode. After the link is established, the client still needs IP configuration, commonly through DHCP or IPv6 mechanisms, and may then face a network access policy such as a captive portal.
A correct Wi-Fi password proves neither DHCP success nor Internet authorization. When a device says connected without Internet, check association, key establishment, address configuration, gateway reachability, DNS and portal state as separate stages.
Troubleshoot the layer that failed
Compare the station and access point logs for authentication or association failures. If the link is up, inspect DHCP and IPv6 Router Advertisements; if an address exists, test DNS and routing; if traffic is restricted, check the Captive Portal API or operator policy.
Wi-Fi is a family of IEEE 802.11 standards, while WPA3 is a security certification program and Captive Portal is an access-control pattern above the link. Protocol Explorer simplifies the wireless setup sequence and does not scan nearby networks.
Explore Wi-Fi interactively
Follow the matching exchange packet by packet. The animation is a scripted teaching model with illustrative timing, not a capture of your network.
Specification and source
For exact protocol requirements, consult the primary document: IEEE 802.11 Wireless LAN Standard. This page summarizes selected behavior and is not a substitute for the specification.
Related protocol lessons
Browse all security and access protocols · Follow Wi-Fi association into network access